Gen2 MI Scope Mount

$149.95
(No reviews yet) | Write a Review
Adding to cart… The item has been added
  • A forward offset mount to give proper eye relief specifically for AR platform rifles
  • Heavy duty for extreme use
  • 1" ring diameter
  • Dual steel locking lugs
  • One-piece long clamp bar will not loosen or shift under heavy use or recoil
  • 1/2" steel locking nuts
  • Places the scope 1.415 above the top of the rifle allowing for the use of scopes with up to a 56mm objective
  • Constructed from 6061 aluminum, hard coat anodized for a lifetime of service
  • 100% Made in U.S.A. with a lifetime warranty
  • Torque cross bolts to 45 INCH/pounds
  • Torque ring cap screws to 25 INCH/pounds

QD1SM Technical Specs (1.0in)
Works with scopes with up to a 56mm objective
Weight 8.1 oz
Overall length: 5.875 in.
Width of rings: .85 in.
Distance between rings: 2.80 in.
Offset from base to the fi. ring: 1.40 in.
Distance - top of rail to center line of ring: 1.415 in.

QD30SM Technical Specs (30MM)
Works with scopes with up to a 56mm objective
Weight: 8.4oz
Overall length: 5.875 in.
Width of rings: .85 in.
Distance between rings: 2.80 in.
Offset from the first ring: 1.40 in.
Distance - top of rail to center line of ring: 1.50 in
 
QD30SM-20MOA Technical Specs (20MOA 30MM)
Works with 30MM scopes with up to a 50mm objective
Weight: 8.4oz
Overall length: 5.875 in.
Width of rings: .85 in.
Distance between rings: 2.80 in.
Offset from the first ring: 1.40 in.
Distance - top of rail to center line of ring: 1.50 in.