- Attaches to AK rifles with standard AKM receiver rail interface
- Puts optic on center or extremely close to center of the top cover on mil-spec built AK rifles
- Modular top piece allows the top to be changed to a different configuration later if desired
- Constructed from hard coat anodized 6061 aluminum
- Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking
- Weight 7.4 oz
- 100% Made in U.S.A., with MI Lifetime Warranty
15 Reviews Hide Reviews Show Reviews
-
5 Gen 2 AK AKOG Mount
Posted by Mike on Jul 17th 2023
Read the directions first. I know, weird. However, it was a helper. It was easy to adjust to center the rail on my rifle, in-line with my trunions. Those are those two screws that attach the rail section to the locking body for those that haven't bought this yet. Remove the screws, apply medium (blue) loc-tite to threads. If you have red... burn it. Nobody needs that shit on gun-parts. READ the instructions for the QD lever adjustment. You will cry unmanly tears if you don't (and you'll void your warranty... lol). Awesome, well built, what I expect from Midwest Industries. Thanks.
-
5 Excellent Mount
Posted by James Bass on Jul 13th 2023
This is a very well made, excellent mount that fit my WASR-10. Take your time and check the tension after every turn of the tensioner bolt. This fits firmly to the rifle. I recommend this mount.
-
4 Well built
Posted by Boris on Mar 5th 2023
I bought this for my new Century Arms BFT AK47. It slid on the side rail and locked up tightly without any wobble or play. As far as I can tell the, picatinny aligns dead center with the bore of the rifle. This is a well built and good looking unit. The only reason I did not give this 5 stars is the realease latch could be beast to unlock due to the flush design. A little bit more protrusion of the realease lever would make this more comfortable to unlatch in case you're wearing gloves or got overzealous with a locking down the mount too tightly.
-
5 Works perfectly on WASR-10 with Romeo 5
Posted by John B on Mar 29th 2021
Fits directly over center of bore about 3/16" over the dust cover on my rifle. Just enough room to remove the dust cover with the mount still attached. It adjusts and mounts easily and holds zero when you remove it and remount it. I have a gen 1 midwest industries picatinny mount with a primary arms scope on it, and I can switch them out, shoot iron sights, and then put them back on, and they both hold zero. Both mounts are excellent products. I purchased mine on another site, but I thought the mounts were so good, I made an account on here to share my experience.
-
5 Solid Mount
Posted by JJ on Feb 11th 2021
This is a very solid and secure mount. I was pleasantly surprised to see that this fit directly to my Primary Arms 3X ACSS Prism. I have been also very happy with how it always seems to keep zero, no matter how many times I remove and reinstall the mount. I have a ton of Midwest Ind. products, their handguards are on all my AK pistols. I have been happy with everything I have gotten with an MI logo on it.
-
5 Great craftsmanship and quality
Posted by Sean P. on Oct 29th 2020
Perfect fit on a PSA AK-E. The engineering, quality, and finish on this mount is top notch. Been waiting for months for this to come back in stock, so when I saw it available I jumped on it quick! Its already sold out again!
-
5 Mounted on PSAK47 , With a Sig Romeo5.....
Posted by Arthur Varady on Jun 25th 2020
Bought this mount for use on a PSAK47 because all other mounts did not seem to be low enough on the dust cover ,they just sat way to high and were not inline to the receiver.Midwest was out of stock with there full Picatinny Mount and I wanted to put a scope on the rifle. So I opted for a Sig Romeo5 and it fit like a dream, If your on the fence about getting this MI-AKSMG2-T1-T2 Mount for your side mount 47/74 It Will Work.
-
5 mounted on ak74
Posted by poster on Mar 4th 2020
Love it. Bought this to mount a romeo5 on my ak74. Mounting my optic was a breeze. Roughed in sight using the irons. Was hitting paper with the first shot. Love it so far.
-
5 So far, so good
Posted by Unknown on Feb 4th 2020
Bought this to use on a PSA GF3 with a Primary Arms 3x Prism optic. The scope is centered perfectly over my top cover, and everything has held zero after 150 ish rounds and several test runs of the QD system. Only time will tell if this mount holds up in the long term, but so far, so good.
