- Attaches to AK rifles with standard AKM receiver rail interface
- Puts optic on center or extremely close to center of the top cover on mil-spec built AK rifles
- Modular top piece allows the top to be changed to a different configuration later if desired
- Constructed from hard coat anodized 6061 aluminum
- Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking
- Weight 7.4 oz
- 100% Made in U.S.A., with MI Lifetime Warranty
20 Reviews Hide Reviews Show Reviews
-
5 Gen 2 ak side mount
Posted by Virgil Sampson on Sep 20th 2024
Works perfectly and is a snug fit. The mountain does not rattle and is sturdy. The micro adjustments make alignment of the pick rail easy. Just make sure you blue Lock tight the bolts before you torque the bolts down and let cure for 24 hours.
-
4 Side mount
Posted by Kenneth Pattin on Aug 18th 2024
It fits like a glove and easy to remove just in case I have too.
-
5 Gen 2 AK side mount
Posted by Dennis Hillard on May 6th 2024
High quality product fits tight and I can change it to another sight mount easily, looks great on my KR - 103
-
5 Gen 2 ak side mount
Posted by Luke on Mar 17th 2024
Fits great on the saiga 7.62
-
5 AaAK Gen 2 side mount
Posted by Vic on Nov 23rd 2023
I purchased this to replace another brand that did not fit my AK correctly and had a rail so poorly made my red dot scope wouldn't fit on it. Quality made and looks great
-
5 Gen 2 AK AKOG Mount
Posted by Mike on Jul 17th 2023
Read the directions first. I know, weird. However, it was a helper. It was easy to adjust to center the rail on my rifle, in-line with my trunions. Those are those two screws that attach the rail section to the locking body for those that haven't bought this yet. Remove the screws, apply medium (blue) loc-tite to threads. If you have red... burn it. Nobody needs that shit on gun-parts. READ the instructions for the QD lever adjustment. You will cry unmanly tears if you don't (and you'll void your warranty... lol). Awesome, well built, what I expect from Midwest Industries. Thanks.
-
5 Excellent Mount
Posted by James Bass on Jul 13th 2023
This is a very well made, excellent mount that fit my WASR-10. Take your time and check the tension after every turn of the tensioner bolt. This fits firmly to the rifle. I recommend this mount.
-
4 Well built
Posted by Boris on Mar 5th 2023
I bought this for my new Century Arms BFT AK47. It slid on the side rail and locked up tightly without any wobble or play. As far as I can tell the, picatinny aligns dead center with the bore of the rifle. This is a well built and good looking unit. The only reason I did not give this 5 stars is the realease latch could be beast to unlock due to the flush design. A little bit more protrusion of the realease lever would make this more comfortable to unlatch in case you're wearing gloves or got overzealous with a locking down the mount too tightly.
-
5 Works perfectly on WASR-10 with Romeo 5
Posted by John B on Mar 29th 2021
Fits directly over center of bore about 3/16" over the dust cover on my rifle. Just enough room to remove the dust cover with the mount still attached. It adjusts and mounts easily and holds zero when you remove it and remount it. I have a gen 1 midwest industries picatinny mount with a primary arms scope on it, and I can switch them out, shoot iron sights, and then put them back on, and they both hold zero. Both mounts are excellent products. I purchased mine on another site, but I thought the mounts were so good, I made an account on here to share my experience.